Display Unit Display type 10″ monochrome CRT Resolution 640×480 dots Minimum range 25m (1⁄8 NM range) Maximum range MR-1000RII MR-1000TII   36NM 48NM Measurement range (unit:NM) 1⁄8 , 1⁄4, 1⁄2 , 3⁄4 , 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36, 48* * MR-1000TII only Preheat time 90sec. Power supply 10.2–42V DC Power consumption MR-1000RII MR-1000TII   60W (approx.) 70W (approx.) Operating temp. range –15°C to +55°C Unit of distance NM (nautical mile), km Dimensions (projections not included) 269(W)×264(H)×258(D) mm Weight (approx.) 6.5kg Input data format NMEA 0183, N+1, AUX Output data format NMEA 0183 Scanner Unit MR-1000RII Type 60cm slotted waveguide array in radome Rotation speed 24, 36, 48rpm typ. Beamwidth Horizontal beam Vertical beam   4° typ. 22° typ. Sidelobe –18dB typ. Polarization Horizontal Dimensions (projections not included) 607(Ø)×243(H)mm Weight (approx.) 8kg Operating temperature range –25°C to +70°C Frequency 9410MHz ±30MHz Peak output power 4kW Pulse-width/Reception rate 80nsec./2880Hz, 80nsec./2160Hz, 250nsec./2160Hz, 350nsec./2160Hz, 900nsec./720Hz Modulator FET switching Mixer and local oscillator Microwave integrated circuit Intermediate frequency 60MHz IF passband width 10MHz, 3MHz Tuning Auto or manual System cable 15m (49.2ft); OPC-1188 Scanner Unit MR-1000TII Type 120cm slotted waveguide array Rotation speed 24, 36, 48rpm typ. Beamwidth Horizontal beam Vertical beam   2° typ. 25° typ. Sidelobe –24dB typ. Polarization Horizontal Dimensions (projections not included) 607(Ø)×243(H)mm Weight (approx.) 8kg Operating temperature range –25°C to +70°C Frequency 9410MHz ±30MHz Peak output power 4kW Pulse-width/Reception rate 80nsec./2880Hz, 80nsec./2160Hz, 250nsec./2160Hz, 350nsec./2160Hz, 900nsec./720Hz Modulator FET switching Mixer and local oscillator Microwave integrated circuit Intermediate frequency 60MHz IF passband width 10MHz, 3MHz Tuning Auto or manual System cable 20m (65.6ft); OPC-1189 (Peeled for connection with MR-1000TII.) All stated specifications are subject to change without notice or obligation.

Powerful 4kW output power Two types of scanner units available MR-1000TII: 120cm open array scanner observes up to 48nm Open Array Scanner for MR-1000TII MR-1000RII: 60cm radome scanner observes up to 36nm Radome Scanner for MR-1000RII 8-level bright picture on 10-inch monochrome green CRT Simplified Automatic Tracking Aid function External GPS and Compass data input with NMEA0183, N+1, AUX format English and Korean indication North-up, Course-up, Head-up& True-motion Bearing, speed and position data required. Depends on display mode. Other Features The MR-1000RII/TII provides many useful features : 2 EBL’s, 2 VRM’s, SEA clutter, RAIN clutter, Off center, Interference reduction, Echo stretch, Zoom, Trail, long pulse and automatic calibration function. When connected to the GPS and/or compass, the MR-1000RII/TII displays the following information: Course-up, North-up, True motion indication, own and other vessel’s speed, position and course, waypoint and man overboard point. Simplified Automatic Tracking Aid allows you to plot up to 10 targets and the radar automatically traces the targets. The CPA (Closest Point Approach) and TCPA (Time to CPA) alarm gives an audible warning when the tracking targets come within the set range or time. Power saver function pauses the scanning for a preset time and conserves battery consumption. When used with the zone alarm function, the CRT display is turned off until an object enters the programmed alarm zone.